Infinity Design carbon intake E9X M3
Paga a rate con Klarna. 18+, si applicano termini e condizioni, credito soggetto ad approvazione. Scopri di più (opens in a new tab)
Dettagli prodotto
Product Highlights
Design
For this application we have opted to do a complete redesign of the entire airbox.The factory intake elbow reduces in size considerably from the plenum opening to the airbox. Increasing the size or smoothing the inlet elbow has been the norm for most intakes with little to no effect in power. The effect on airflow is minimal even if there is an increase in size after going through the restrictive and small area through the OEM airbox.Our design strategy was to create an inlet tube which kept the cross sectional area of the plenum opening consistent and enlarged it. In order to accomplish this we needed to redesign the complete airbox to allow such a large tube to pass through it.The end result is a inlet tube which is significantly larger in volume and cross sectional area which slowly increases in size as it goes to the large surface area air filter. The plenum can now take in air to it's maximum capacity as the cross sectional area remains the same and increases.
High Flow Air Filters & Intake Temperatures
Our bespoke short stack high surface area filter larger than any cone filter design currently on offer on the market with a huge opening of 170mm (6 3/4") and is designed to take full advantage of the intake tubes by altering the direction of the airflow towards the outer walls. By placing the air filters in front of the inlet tube we achieve the largest velocity stack.
PERFORMANCE TESTING
Dyno tests were performed under strict controlled conditions on an independent Dyno Dynamics machine in order to show a true and realistic result.The test car was a 100% stock 2012 DCT with 62,000 miles.A healthy and genuine increase of 10-12hp | 8-10 lb.ft from 6000-8300rpmThe results shown are the highest stock result vs the highest result with the intake. This can be clearly seen from the shape of the stock dyno run as it's shape is smooth and the power does not fall off at the high rpm. The stock car makes it's peak power at the factory 8300rpm. Many companies will use stock runs which are early runs in the session with high IAT's which result in the ECU retarding ignition timing. This results in a graph which does not have a natural shape and flattens off at high rpm. More importantly, the upgraded airbox dyno graph does not have a torque curve which has a consistent gain through the rpm range. These types of dyno results suggest a correction factor has been used to show a false gain. The test performed here shows a realistic result as the torque curve is almost identical at low rpm and only begins to gain power after 4000rpm and especially after 6000rpm where the air demand is higher.With modified cars with exhausts which delete the highly restrictive primary catalytic converters, the results will be similar or higher.
What is in the Box
1 x Carbon Venturi Inlet Tube
1 x Full Carbon Lower Airbox
1 x Carbon Lid
1 x Air Filter
1 x Clamp
1 x Silicone Coupler
1 x Silicone Joiner
Spedizione e consegna
I tempi di spedizione variano da marchio a marchio. Stiamo aggiornando le pagine prodotto con date di consegna precise.
Per una data di consegna stimata di questo ricambio, scrivi a sales@cpcclubsport.com.
Perché CPC Clubsport?
CPC Clubsport è nata da due amici che da anni costruiscono, guidano e sviluppano le proprie BMW M, su strada, in pista e al Nürburgring.
Circa il 90% della nostra gamma è stato provato, testato o sviluppato sulle nostre auto. Ogni ricambio è scelto per qualità, affidabilità e un vero scopo in pista, e siamo sempre felici di aiutarti a trovare quello giusto per la tua auto.
Serve aiuto?
Non sei sicuro che questo ricambio sia compatibile o quale opzione sia giusta per la tua auto? Il nostro team è felice di aiutarti.
Chiamaci
07767 134595
Dal lunedì al venerdì, dalle 9:00 alle 17:00 (ora del Regno Unito).
Scrivici
sales@cpcclubsport.com
Cerchiamo di rispondere entro 48 ore.
Per darti subito la risposta giusta, tieni a portata di mano modello BMW, codice telaio, anno e dettagli di eventuali modifiche già presenti.
Puoi anche consultare le nostre FAQ o visitare la nostra pagina contatti.
Cosa dicono i nostri clienti
Excellent
5.0 out of 5 · Based on 15 reviews
-
Bought the Infinity Design S65 Modular Carbon Plenum for my E9X M3. The finish is excellent and it completely transforms the look of the engine bay. It feels like a properly engineered piece rather than just a cosmetic upgrade. Really pleased with how it looks once fitted.
-
I went with the Endless MX-72 Plus Brake Pads for my G8X and they've been a great upgrade. The pedal feels positive and the pads give plenty of confidence when braking hard. They also work well for normal road driving, which was important to me. CPC Clubsport made the whole ordering process easy.
-
Ordered the Solid Billet Aluminium Oil Filter Cap for my BMW. It's a relatively small upgrade, but the quality and finish are excellent and it looks much better than the standard item. It arrived well packaged and fitted without any issues. Another quality part from CPC Clubsport.
-
Bought the HEL Performance Carbon Fibre Brake Pad Shims for my F80 M3. The quality is excellent and they fitted perfectly with the brake setup. Everything arrived securely packaged and exactly as described on the website. A straightforward purchase from CPC Clubsport.
Reviewed: HEL Performance Carbon Fibre Brake Pad Shims F8X (Front)
-
Had the Nitron NTR R3 Coilovers fitted to my E9X M3 and the difference is impressive. The car feels much more controlled and planted, particularly through faster corners. The adjustability is a big advantage as well, allowing the setup to be tailored to how I use the car. Excellent upgrade for a car that sees both road and track use.
-
Fitted the Ferodo DS1.11 Brake Pads F8X (Front) to my F82 M4 and they've been excellent. The initial bite is strong and the braking feels much more consistent when pushing the car hard. They’re particularly impressive on track where the brakes stay predictable through repeated heavy braking zones. Very happy with the purchase and service from CPC Clubsport.
Reviewed: Ferodo DS1.11 Brake Pads F8X (Front)
-
Ordered the MMX Performance 15mm Wheel Spacers & Bolt Kit for my G8X. The kit arrived complete and well packaged, and installation was straightforward. The spacers give the car a much better stance without going overboard. Really happy with how the car looks and with the quality of the kit.
Reviewed: MMX Performance 15mm Wheel Spacers & Bolt Kit - G8X
-
Recently fitted the SG Motorworks S65 Unfiltered Velocity Stack Kit to my E9X M3. The quality of the kit is excellent and the finish looks great once installed. The engine sounds noticeably more aggressive under acceleration and the throttle response feels really sharp. Very pleased with the upgrade.
-
Picked up the Millers Oil Motorsport CFS 10W-60 NT+ for my E9X M3. Ordering was straightforward and the oil arrived well packaged and quickly. I've used Millers in the car for both road driving and track days and have been very happy with it. Good quality product from a company that clearly understands performance BMWs.
-
Recently purchased the Recaro Pole Position ABE Bucket Seat for my BMW. The quality and finish are excellent, and the seat gives a much more supportive driving position when pushing the car on track. It also looks fantastic in the interior. Very pleased with the purchase and the service from CPC Clubsport.
Reviewed: Recaro Pole Position ABE Bucket Seat
-
Bought the BIMMERWORLD DCT OVERFILL/DRY BREAK KIT for my BMW and it was exactly what I was looking for. The kit arrived well packaged and the components feel very well made. Installation was straightforward and it makes servicing the DCT much easier. Good product and a smooth experience ordering from CPC Clubsport.
Reviewed: BIMMERWORLD DCT OVERFILL/DRY BREAK KIT
-
Fitted the AP Racing CP9660 368mm Front Brake Upgrade to my F82 M4 and the improvement in braking performance is immediately noticeable. The pedal feels much more confidence-inspiring and the brakes remain consistent when used hard. The kit looks fantastic behind the wheels as well. Very impressed with the upgrade.
-
Used Endless RF-650 during a brake service on my M3. The fluid was well packaged and arrived quickly from CPC Clubsport. After getting the car back on the road, the pedal feels firm and consistent, including during some spirited driving. A quality product and good service.
Reviewed: Endless RF-650 Brake Fluid 500ml
-
Recently installed the Milltek OPF/GPF Back Exhaust on my F82 M4. The fitment was excellent and the quality of the system is exactly what you'd expect from Milltek. It gives the car a much better exhaust note without becoming unbearable on longer drives. Very happy with the result and the service from CPC Clubsport.
-
Bought the MMX Lowering Springs for my BMW and I'm really pleased with the result. The ride height is noticeably better without making the car uncomfortable for everyday driving. The car also feels more composed through corners. Installation was straightforward and the finished stance looks much better.
Reviewed: MMX Lowering Springs
Chi è CPC Clubsport
Da piloti, per piloti
CPC Clubsport è stata fondata da due amici con una passione di sempre per BMW Motorsport. Da anni costruiamo, guidiamo e sviluppiamo le nostre auto, dalla strada alla pista fino al Nürburgring.
Circa il 90% di ciò che vendiamo è stato provato, testato o sviluppato sulle nostre auto e con gli amici lungo il percorso, e ogni prodotto è scelto per qualità, prestazioni, affidabilità e un vero scopo in pista.